hydroelectric dam, water discharge through locks, long exposure shooting

Comprehensive Strain Gage Glossary for Precision Measurement Solutions | Micro-Measurements

Your Go-To Resource for Strain Gage Terminology in Precision Engineering

Discover the essential glossary of strain gage (gauge) terms tailored for professionals in precision measurement and engineering. At Micro-Measurements, we understand the importance of clear communication in high-stakes industries such as aerospace, automotive, civil engineering, and electronics. This glossary is designed to break down the technical jargon, providing a user-friendly resource for both experienced engineers and those new to strain gage technology. Whether you're involved in stress analysis, fatigue testing, or structural health monitoring, our glossary equips you with the right terminology to enhance decision-making and streamline project execution.

keyboard with one blue button and shopping cart icon

Our commitment to innovation and precision means you get access to not only accurate definitions but also expert insights that reflect the latest industry advancements. From understanding the nuances of strain gage (gauge) calibration to mastering the principles of material strain response, Micro-Measurements' glossary is your key to navigating complex measurement challenges with confidence.

 

Contact Our Expert Application Engineers for Personalized Help

 

Glossary

  • Transfer Coefficient

    A constant that is multiplied times one variable to yield the value of another. The gage factor of a strain gage, for example, is a ~ for obtaining the relative resistance change of a strain gage from the strain producing it.

  • Transformation relationships for stress, strain

    A set of transcendental functions for calculating stress and strain at a point on one set of orthogonal axes from those on another set of axes having a different orientation.

  • Transverse sensitivity

    <ol><li>The behavior of a gage in responding to surface strains which are perpendicular to the primary sensing axis of the gage.</li><li>The ratio, expressed as a percentage, of the unit change of resistance of a strain gage mounted perpendicular to a uniaxial strain field (transverse gage) to the unit resistance change of a similar gage mounted parallel to the same strain field (longitudinal gage).</li></ol>

  • Tresca failure criterion

    Failure model based on the maximum shearing stress required to initiate yielding.

  • Type, strain gage

    Description for a group of strain gages which are nominally identical with respect to physical and manufacturing characteristics.

  • Unbalanced bridge

    A Wheatstone bridge for which the arm resistances are such that they produce an output voltage between the signal corners when an input voltage is applied between the power corners.

  • Uncertainty

    A statistically defined discrepancy between a measured quantity and the true value of that quantity that cannot be corrected by calculation or calibration.

  • Uniaxial strain field

    Strain field in which only one of the principal strains is nonzero. Atypical because Poisson strains are usually present.

  • Uniaxial strain gage

    Strain gage having a single linear grid designed to measure strain primarily along the longitudinal axis of the grid.

  • Uniaxial stress field

    Stress field in which one of the principal stresses is zero. Typical, for example, of simple tension or compression for which a load is applied in a single direction and the transverse stress is zero.

  • Unit strain

    A strain defined by the change in length per unit length of a line, either Eulerian or Lagrangian.

  • Voltage injection

    Method of zero-balancing an instrument by injecting a voltage of opposite sign but like magnitude into the output from an unbalanced Wheatstone bridge.

  • Von Mises failure criterion

    Failure model based on the distortional energy necessary to initiate yielding.

  • Weldable strain gage

    Strain gage on a metal shim that can be spot-welded to a test structure or component.

  • Wheatstone bridge

    A four-arm, four-terminal resistance-measuring network, with two terminals (P+, P-) for voltage input (E); the remaining two (S+, S-) for signal output (Eo).

  • X-axis

    The horizontal axis in a system of rectangular Cartesian coordinates; the axis of abscissas. Usually representing the independent variable.

  • Y-axis

    The vertical axis in a system of rectangular Cartesian coordinates; the axis of ordinates. Usually representing the dependent variable.

  • Yield point

    The coordinate on the stress-strain curve of a material in uniaxial tension or compression representing the onset of significant plastic deformation. Typically the fracture point for brittle materials and the coordinate at an offset strain of 0.2% for ductile materials. Synonym:: elastic limit

  • Yield strength

    <ol><li>The stress necessary to produce significant plastic deformation in a material under uniaxial tensile or compressive load.</li><li>The stress on a stress-strain curve at the yield point.</li></ol>

  • Young's modulus, Elastic modulus, modulus of elasticity,

    A materials property defined as the ratio of (a) the uniaxial stress along an axis of the material to (b) the accompanying normal strain along that axis.

  • Zero balance

    State of a strain gage instrument which has been adjusted to yield no output. The instrument may be zero-balanced even if the Wheatstone bridge is resistively unbalanced. Related: null balance, resistive balance

  • Zero Drift

    Gradual, normally permanent change in the resistance of an installed strain gage, bridge completion resistor, or leadwire that is unrelated to strain.

  • Zero Return

    The ability of a strain-gage measurement system to return to its initial condition after an applied load is removed.

  • Zero shift

    A normally temporary, reversible change in the resistance of an installed strain gage, bridge completion resistor, or leadwire that is unrelated to strain.