hydroelectric dam, water discharge through locks, long exposure shooting

Comprehensive Strain Gage Glossary for Precision Measurement Solutions | Micro-Measurements

Your Go-To Resource for Strain Gage Terminology in Precision Engineering

Discover the essential glossary of strain gage (gauge) terms tailored for professionals in precision measurement and engineering. At Micro-Measurements, we understand the importance of clear communication in high-stakes industries such as aerospace, automotive, civil engineering, and electronics. This glossary is designed to break down the technical jargon, providing a user-friendly resource for both experienced engineers and those new to strain gage technology. Whether you're involved in stress analysis, fatigue testing, or structural health monitoring, our glossary equips you with the right terminology to enhance decision-making and streamline project execution.

keyboard with one blue button and shopping cart icon

Our commitment to innovation and precision means you get access to not only accurate definitions but also expert insights that reflect the latest industry advancements. From understanding the nuances of strain gage (gauge) calibration to mastering the principles of material strain response, Micro-Measurements' glossary is your key to navigating complex measurement challenges with confidence.

 

Contact Our Expert Application Engineers for Personalized Help

 

Glossary

  • Nominal resistance

    The intended resistance of a strain gage as designed. The actual resistance may vary due to manufacturing tolerances and effects of installation.

  • Nonlinearity (Wheatstone bridge)

    Deviation of the signal produced by unbalanced Wheatstone bridge from direct proportionality with strain-induced changes in resistances in one or more arms.

  • Nonlinearity, Wheatstone bridge

    Deviation of the signal produced by unbalanced Wheatstone bridge from direct proportionality with strain-induced changes in resistances in one or more arms.

  • Normal Strains

    The Lagrangian strain components of strain at a point that result in volume changes. That is, the ratio of the change in length of an object in some direction per unit original length in that same direction.

  • Normal stresses

    The stresses at a point that are oriented perpendicular to the planes on which they act.

  • Opposite arms, (Wheatstone bridge)

    Any two arms not sharing a common corner of a Wheatstone bridge.

  • Opposite corners (Wheatstone bridge)

    Any two corners in a Wheatstone bridge separated by two arms.

  • Ordinate

    In a system of rectangular Cartesian coordinates, the distance of a point along the vertical Y-axis from the horizontal X-axis. Usually the dependent variable.

  • Orthotropic material

    Material having mechanical properties that are different in three mutually perpendicular directions at a point in a body of it, and that have three mutually perpendicular planes of material symmetry. That is, the properties are a function of the orientation at a point. <br /><br />Wood is an example of an orthotropic material. Related: anisotropic material, orthotropic material

  • Out-of-plane

    A stress or strain inclined at some angle to the plane on which strain measurements are made.

  • Output (Bridge output)

    Electrical output across the signal corners (S+, S-) of the Wheatstone bridge. Sometimes represented as the ratio of the output to the input, i.e., mV/V.

  • Pattern (strain gage)

    The specific design of a strain gage, including the solder tabs, sensing grids, and endloops.

  • Photoelastic coating

    A thin, transparent plastic of uniform thickness which, when bonded to the surface of a test part and viewed with polarized light, produces a full-field indication of the strains present in that surface under load from which stress can be inferred.

  • Photoelasticity

    Changes in the optical properties of a transparent material when it is subjected to mechanical stress. The mechanical birefringence of certain materials enables determination of stress and strains from the interference fringe patterns they produce.

  • Planar rosette

    Strain gage rosette in which all grids are on a common plane oriented about a common point.

  • Plane strain

    State of strain in which one of the three principal strains is zero and the remaining two are nonzero. Synonym: biaxial strain

  • Plane stress

    State of stress in which one of the three principal stresses is zero and the remaining two are nonzero, as in a thin sheet stressed in its own plane.

  • Plastic deformation

    The permanent change in shape or size of a body without fracture, produced by a sustained stress beyond the elastic limit of the material.

  • Plate

    A relatively flat, three-dimensional object for which two dimensions are large compared to the third. Usually loaded parallel to the smallest dimension (pressure) or in shear in the plane of the largest two dimensions.

  • Poisson bridge

    half or full bridge in which strain gages are connected in adjacent arms to measure the principal strains in a uniaxial stress field.

  • Poisson strains

    Strains created in a material by an applied normal stress perpendicular to the axis of the applied stress.

  • Poisson's ratio

    The absolute ratio of (a) the transverse to (b) the longitudinal normal strains in a strain field produced by a uniaxial stress along the longitudinal axis. The value is always between 0.0 and 0.5 for materials having isotropic mechanical properties.

  • Polyimide

    Flexible, temperature-resistant polymer used as a backing and encapsulation for strain gages.

  • Power corners (Wheatstone bridge)

    The two opposite corners (P+, P-) of the Wheatstone bridge to which the input voltage (E) is applied.

  • Power leadwires

    Leadwires between the power corners of a Wheatstone bridge and the power supply. Attenuates the input voltage of constant voltage power supplies.

  • Power supply (Bridge)

    A source of constant current or constant voltage for providing excitation to a Wheatstone bridge.

  • Principal axes of stress, strain

    Sets of orthogonal axes on which the greatest and least stresses and strains in each plane, respectively, are located.

  • Principal Strains

    The maximum and minimum normal strains in a plane, always perpendicular to each other and oriented in directions for which the shear strains are zero.

  • Principal stresses

    The maximum and minimum normal stresses in a plane, always perpendicular to each other and oriented in directions for which the shear stresses are zero.

  • Proportional limit

    For a truly elastic material under uniaxial tensile or compressive load, the coordinate on a stress-strain curve at which the nonzero principal stress begins to vary in a nonlinear manner with the corresponding principal strain. Or in other words this is when an increase in stress no longer has a linear relationship with an increase in strain.

  • Protective coating

    Layer of material applied over a strain gage installation to minimize the effects of moisture, chemical attack, and mechanical damage.

  • Pure shear

    Special state of plane stress for which the sum of the two nonzero principal stresses is zero. Under this condition, there is no expansion or contraction in the direction of the zero principal stress, and consequently, no normal strain in that direction.

  • Quarter-bridge circuit

    Wheatstone bridge circuit having a single active arm, typically the result of connecting a single strain gage to an instrument.

  • Range

    <ol><li>The difference in the largest and smallest values of a measurand.</li><li>The largest and smallest values of a measurand.</li></ol>

  • Rankine failure criteria

    Failure model based on the maximum or minimum principal stress required to initiate yielding.

  • Readout

    An analog or digital device for visually indicating the sign and magnitude of a measurement.

  • Relative resistance change

    The ratio of a change in resistance to the initial resistance. In strain gages directly related through the gage factor to the strain that produces it.

  • Repeatability

    A measure of the ability of a transducer to repeatedly produce the same measurement signal for the same measurand. Repeatability is typically specified as the expected deviation in the signal, i.e., a repeatability of 1 part in 10 000 or 1:10 000, for example.

  • Resistive balance

    State of a Wheatstone bridge for which a specific combination of bridge-arm resistances will yield no bridge output when bridge voltage is applied. A method of achieving zero balance.

  • Resistivity

    The electrical resistance of a material to the flow of current, times the cross-sectional area of current flow and per unit length of current path. In electrical resistance strain gages, changes with strain.

  • Resolution

    The smallest measurable increment of a measurand.

  • Room temperature

    At or near 75 deg F (24 deg C).

  • Rosette

    Strain gage containing two or more independent grids for making measurements of strain along each of their axes about a common point.

  • Rosette

    Delta rosette, Three-element strain-gage rosette in which the grids are oriented at 0, 60, 120 degrees, respectively. Synonyms: 60-degree rosette, equiangular rosette

  • Rosette

    Rectangular rosette, Three-element strain-gage rosette in which the grids are oriented at 0, 45, and 90 degrees, respectively. Synonym: 45-degree rosette

  • Rosette

    Tee rosette, Two-element strain-gage rosette in which the grids are oriented perpendicular to one another. Synonym: 90-degree rosette

  • Rosette

    planar rosette, Strain gage rosette in which all grids are on a common plane, oriented about a common point.

  • Rosette

    Strain gage containing two or more independent grids for making measurements of strain along each of their axes about a common point.

  • RTD, Temperature sensors, resistance

    Resistive sensors, constructed much like a strain gage but with nickel or nickel/manganin grids, used to measure the surface temperature of test specimens to which they are bonded. Synonym: resistive temperature detectors (RTD)

  • Scaling factor

    A transfer coefficient or correction factor that is multiplied times one variable to yield the value of another.